AiM RPM Bridge

ECU Bridge and RPM Bridge: these two systems are needed whenever engine data are to be visualized on a display or on a SmartyCam HD video, if no recording is required. They are compatible with G-Dash and Formula/GT steering wheels, and of course with the SmartyCam HD on-board cameras. ECU Bridge is to be used in case the Engine Control Unit transmits data in the following hardware protocols: OBDII, CAN or RS232.

AiM has developed hundreds of different protocols, to make compatibility with virtually all ECUs possible, either stock and after market ECUs.

ECU Bridge has to be properly configured with Race Studio 2software to communicate with the different visors/cameras on one side and ECUs on the other side.

RPM Bridge is to be used whenever the car has got no ECU (i.e. classic cars).
In this case RPM data can be obtained with connection to the coil or reading a square wave signal generated by the ignition system.

AIM RPM Bridge Website Product Description.

ECU Bridge technical characteristics RPM Bridge technical characteristics
Configurable ECU interface Coil signal 150-400 V
CAN protocol for external modules (visors or SmartyCam HD) Square wave signal 4-50 V
USB port for PC communication CAN protocol for external modules (visors or SmartyCam HD)
External power 8/18 V USB port for PC communication
External power 8/18 V

USB cable

Part number: V02563030

AiM RPM Bridge

Related Items