AiM Solo 2 DL

Solo 2 DL, the Solo with ECU connection

More than 1,000 protocols for 1,000+ ECU in the database,
for easily connect your Solo 2 DL to your Engine Control Unit
and get a lot of information with just one cable.
In case your ECU protocol is not in the database, no problem:
an ECU Driver Builder is always available in the Race Studio 3
configuration software, and you will be able to create
your protocol by yourself.
Coil RPM input Solo 2 DL now features a digital input allowing to log RPM
either from square wave signals (8-50 V signal)
or pulse signals (150-450 V ignition coil trigger - primary circuit).

Solo 2
the most precise and easy way to get lap times

The new Solo 2 receives the data from two satellites constellations, GPS and Glonass: this is a huge step forward since it is unbelievably faster and more precise than the previous version and the lap times are calculated within a maximum gap not higher than 2/100 sec.

The screen can be backlited in one of the seven available colors:

Find your track easily and quickly

Solo 2 can rely on a database of more than 2,000 tracks all over the world: as soon as it switches on, Solo 2 identifies its position, recognizes the starting line coordinates of the track and starts sampling lap times.

In case the track is not in the database, no problem: Solo 2 realizes it and switches to learning mode, automatically understands the characteristics of the track and gives the lap time anyway.

Configurable RGB LEDs

Even the predictive lap time is much more reliable,
and the configurable RGB LEDs
will give you the time gap compared to the best lap you set as reference.

Race mode selection

Solo 2 can manage two types of races:

  • Speed races in a closed circuit
  • Performance tests (0-100 km/h etc.)

In each of these configurations,
Solo 2 gives the proper information
during the test and powerful data
review immediately after each session.

Data recall on screen

At the end of your test,
you can quickly review
all the key information on your display.

Wi-Fi communication with the PC

Wi-Fi connection: easy, fast, without
connectors nor cables: the best way
to configure your Solo 2, to manage
the track database, to download
the data to your PC.

SmartyCam HD connection

The perfect connection: get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, that will show them in graphical overlay in the video.

Specific bar pads for motocross

Bar pads to fit handle bars
with and without brace
are available for immediate
installation on every kind
of motocross bike.

 

Bar Pad for handle bars with cross brace
Part number X47KPSOLO2T20

In the box: Bar Pad, transparent protection cover, mounting bracket, 4 12 mm M3 screws, installation guide.

Bar Pad for handle bars without cross brace

Part number X47KPSOLO2T10

In the box: Bar Pad, transparent protection cover, mounting bracket, 4 12 mm M3 screws, installation guide.


Connection kits for sports bikes

AiM designed specific applications to allow easy installation and connection of both Solo 2/Solo 2 DL on sports bikes. Installation kits for BMW, Ducati, Honda, Kawasaki, MV Agusta, Suzuki and Yamaha are currently available. More will follow.

BMW DUCATI HONDA
BMW DUCATI HONDA
KAWASAKI MV AGUSTA SUZUKI
KAWASAKI
MV AGUSTA SUZUKI
YAMAHA
YAMAHA


AiM Solo 2 Website Product Description.

 Display Graphical
 Display resolution 238x99 pixels
 Display pages Up to 5 freely configurable
 Backlight 7 configurable RGB colors
 Shift lights/alarm LEDs 10 configurable RGB LEDs
 Integrated track database Yes
 Inertial platform Internal 3 axis ±5G accelerometer + 3 axis gyro
+ 3 axis magnetometer
 Wi-Fi connection Yes
 GPS 10 Hz
 External power 12 V
 Memory 4 GB
 Battery type Rechargeable Lithium
 Pushbuttons Metallic
 Dimensions 98.0x73.7x30.2 mm
 Weight 240 g, battery included
 Waterproof IP67
 Solo 2 DL  
 ECU connection CAN, RS232 or K-Line to 1,000 + industry leading ECUs


SOLO 2 DL

IN THE BOX

Solo 2 DL

Solo 2 DL, power cable with AC adapter, mounting bracket with screws, user manual, software installation CD, AiM sticker.
Concerning the cables you can choose among:

  • CAN/K-Line/External power cable with OBDII connector
  • CAN/RS232 external power cable
  • RPM/External power cable (if your vehicle has no ECU)

Note: all cables are available in these four versions: Australian, UK, USA and European adaptor.

BRACKET KITS

Solo 2/Solo 2 DL can be installed using the following bracket kits:

CAN/K-Line + external power cable 2 m with OBDII connector

Part number: V02589040

 

RCAN/RS232 + external power cable 2 m

Part number: V02589050

RPM + external power cable

Part number: V02589020


SUPPORT FOR ROLL-BAR

Part number X46KSTG00

The kit contains: 90 mm arm, roll-bar bracket, clamp base with ball, locknut, 4.5 cm and 5.5 cm tube clamp, gasket, screws and washers.


SUPPORT FOR GENERIC TUBE, max 3 cm diameter

Part number X46KSTP00

The kit contains: 90 mm arm, clamp base with ball, 2.5 and 3 cm (diameter) "U" shaped junctions, locknut, screws and washers.

SUPPORT FOR SUCTION CUP

Part number X46KSVS00

The kit contains: 90 mm arm, suction cup, clamp base with ball, locknut, screws and washers.


BAR PADS

Bar Pad for handle bars with cross brace
Part number X47KPSOLO2T20

In the box: Bar Pad, transparent protection cover, mounting bracket, 4 12 mm M3 screws, installation guide.

Bar Pad for handle bars without cross brace

Part number X47KPSOLO2T10

In the box: Bar Pad, transparent protection cover, mounting bracket, 4 12 mm M3 screws, installation guide.


Spare parts

Mounting bracket with screws

Part number: X47KPFSOLO2R0

12 V power cable with AC adapter

Part number: X06A12VBMU

 


Related Items