Braille Lithium 12v 6A Battery Charger / Maintainer_ 1236L

Braille 12v 6A lithium charger/maintainer charges at a reasonably quick 6 Amps and is designed to maintain and keep Braille lithium batteries fully charged when not in use or sitting for long periods of time.

In the case that a Braille lithium battery is every fully discharged (10 volts is considered 0% state of charge on a 12v lithium battery), this charger does have a 'pre-charge/revival mode' that will do a slow 'pulse charge' as long as the battery has at least 2 volts (to know that it is connected to a battery) and will slowly bring it back up to 10 volts before charging at the standard 6 Amp rate back up to full.

This updated charger now comes with an SAE quick disconnect end, along with a ring terminal harness and standard battery clamps for more charging solutions in a variety of vehicles, bikes, etc. (Power cord included, but not pictured)

Braille Lithium Chargers web link.

Charger Specs

    DC Output
    DC output voltage, nominal: 14.2v
    DC output current, maximum: 6A
    Replacement output fuse: F10AL250V or T10AL250V (5x20 mm)

    Automatic multi-rate charging CC/CV profile with Pre-charge @1.8A (between 2v-10v) 98% efficiency.

    AC Input
    AC input voltage range: 90-243VAC
    AC input voltage-nominal: 110VAC/220VAC
    AC input frequency: 50-60Hz

    Dimensions: 4.45” x 2.36” x 3.39” (113 x 60 x 86mm)
    Net weight: 2.0lbs (0.907kg)
    Operating Temperature: 14F-113F (-10C-45C)
    Storage Temperature: -40F-158F (-40C-70C)
    Fan Operating Temperature: 104F (40c)
    AC input: US plug, Europlug, EIC320/C13 connector, 1.5 meter
    DC output: Colored Alligator clips & 1.5m ring terminal harness (SAE quick connectors)

    Safety standard: CE listed, NRTL, UL compliant
    Safety-Europe: EN60335-2-29:2002

    Packing List
    1 x charger; 1x user manual; 2 x AC power cord (110VAC, 220VAC)

    Related Items