$ 55.00
The RG.SN.5022 is an NTC (Negative temperature coefficient) temperature sensor. The resistance of the sensor element decreases with increasing air temperature. It is designed as a fluid temp sensor and is not recommended for air temperature due to a slower response time. It is an unpowered sensor and therefore requires that the input line is pulled up, so that the resistance change will result in a voltage drop in the input pin. It is generally recommended to connect the sensor to an AT input on a MoTeC device, as these inputs include a 1k pullup to 5V.
Thread: 1/8 NPT
The voltage information below is provided assuming the sensor is setup on an input including a 1k pullup resistor to 5V. If this is not the case, then the resistance row must be used to calibrate the sensor instead.
|
15873 |
9256 |
5572 |
3457 |
2830 |
2205 |
1443 |
992 |
660 |
475 |
329 |
244 |
175 |
134 |
99 |
80 |
60 |
47 |
|
|
Voltage |
4.704 |
4.512 |
4.239 |
3.878 |
3.695 |
3.440 |
2.953 |
2.490 |
1.988 |
1.610 |
1.238 |
0.981 |
0.745 |
0.591 |
0.450 |
0.368 |
0.283 |
0.224 |
|
Deg C |
-10 |
0 |
10 |
20 |
25 |
30 |
40 |
50 |
60 |
70 |
80 |
90 |
100 |
110 |
120 |
130 |
140 |
