The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests.
MXL2 |
MXG |
MXS |
|
EVO4S |
EVO5 |
||
MXG 1.2 |
MXP |
MXS 1.2 |
Its management is really very simple: just connect the Module to your logger and the data will be saved simultaneously both in the logger and on the SD card*.
No configuration is needed.
The SD card* can be removed and replaced even during pit stops, while the car engine is still ON, making it extremely fast to get the data during endurance races or long tests, when the time at the paddock is really limited.
When the session is over, all you need to do is moving the SD card* from the Module to your PC and download the data using Race Studio 3.
The Module features a front LED showing its recording/fw updating status.
The device can support up to 32 GB cards.
*Not included in the box.
AIM Memory Module |
|
Max power consumption |
50 mA |
Cable length |
40 cm |
SD Card |
It supports up to 32 GB |
Dimensions | 55.5x78.3x18 mm |
Weight | 103 g |
Waterproof | IP65 |
In The Box
Memory Module.