AiM MXS 1.2 Strada

A wide range of data sources

MXS 1.2 Strada, the evolution of MXS Strada, is a 5" color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS08 Module.

AiM MXS 1.2 Strada AiM MXS 1.2 Strada AiM MXS 1.2 Strada AiM MXS 1.2 Strada AiM MXS 1.2 Strada
ECU connection Analog/digital inputs Math channels Second CAN GPS08 Module

MXS 1.2 Strada is available in two versions:


CAN output

With the CAN Output you can send messages directly
to an existing CAN network in order to improve
the range of vehicle control possibilities.

Watch your data
in pre-configured pages

MXS 1.2 Strada shows, together with RPM scale, all the
data you need, like speed, water temperature
and oil pressure, laptimes and much more...
You can choose the custom pages you wish
among a wide library of page styles,
defining which data to be shown,
their end of scale and measure units.
Swapping between pages is quite
easy using the pushbuttons.

High contrast TFT display

MXS 1.2 Strada features a high contrast
TFT display: its visual quality is always
optimal as its ambient light sensor keeps
the backlight at the best brightness levels.
The dash is of course available also
in the "Street Icons" version
(fuel, oil, water temp., etc.).

Flexible alarms

The ten multicolored RGB shift lights can be customized as you like, defining the RPM threshold for each single gear.
The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information.
You choose conditions and colors: select a solid alarm or flashing one - and the flashing frequency.
It is also possible to configure an accompanying text message, and set the alarm priorities.

Digital output

MXS 1.2 Strada features a LOW SIDE type
(switch to ground) digital output configurable
in order to be activated/deactivated depending
on the value of the analog/digital inputs
or on impulses coming from the ECU.
This permits to automatically run external
systems, i.e. to switch on/off additional
lights, to activate/de-activate a cooling
fan or circulation pumps, etc. when a certain
event happens.

More info

AiM MXS 1.2 Strada

Camera inputs, also for mirror camera 

Two analog camera inputs are available,
to swap your display into a mirror camera,
through pushbutton command
or event management.

More info

AiM MXS 1.2 Strada


A modular system

Using the built-in CAN bus you can add expansion modules to visualize additional info:

GPS08 Module

Thanks to GPS08 Module (included in the kit) and its Race Studio 3 software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique.

GPS08 Module

Channel Expansion

It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

Channel Expansion

TC Hub

It adds 4 K thermocouples.

TC Hub


Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.


SmartyCam HD cameras

The on-board cameras that overlays on videos the data sampled by your logger.



SmartyCam HD Rev.2

Connection example

These are only some of the items that can be added to our MXS 1.2 Strada for incrementing the performance
and the data acquired:

Race Studio 3 Configuration

MXS 1.2 Strada is to be configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.
AiM MXS 1.2 Strada

AiM MXS 1.2 Strada Website Product Description.

 Display 5” TFT
 Resolution 800x480 pixels
 Contrast 600:1
 Brightness 700cd/m2 - 1,100 Lumen
 Ambient light sensor Yes
 Alarm LEDs 6 RGB freely configurable
 Shift lights 10 integrated freely configurable RGB LEDs
 CAN connections 2
 ECU connections CAN, RS232 or K-Line
 ECU compatibility + 1,000 industry leading ECUs
 Expansion CAN connection GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
 Analog inputs 8 fully configurable, max 1,000 Hz each
 Digital inputs 1 speed input, coil RPM input
 Digital outputs 1 (1 A max)
 Second CAN Yes
 Body Anodized Aluminum
 Pushbuttons Metallic
 Connectors 2 AMP connectors + 1 Binder connector
 Power consumption 400 mA
 Dimensions 169.4x97x23 mm
 Weight 480 g
 Waterproof IP65


MXS 1.2 Strada, USB cable, 14 pins standard wiring, 23 pins connector + contacts, software installation CD.


23 pins AMP connector wiring for MXS Strada - Standard version

Part number: V02573220

23 pins AMP connector wiring for MXS Strada - Standard version

Infrared optical receiver 90 cm lenght

Part number: X41RX19090

AiM Infrared optical receiver 90 cm lenght

Infrared optical receiver 3 m lenght

Part number: X41RX19300

AiM Infrared optical receiver 90 cm lenght

Remote buttons interface

AiM MXS 1.2 Strada

Mirror camera

Single RearMaster mirror camera patch cable
Double RearMaster mirror camera patch cable
Single AiM mirror camera patch cable
Double AiM mirror camera patch cable

AiM Mirror camera


14 pins standard harness

Part number: V02573320

AiM 14 pins standard harness

14 pins OBD harness

Part number: V02573340

AiM MXS 1.2 Strada

14 pins connector + contacts

Part number: 5CND7762732 + 5CT0770520

AiM MXS 1.2 Strada

23 pins connector + contacts

Part number: 5CND7706802 + 5CT0770520

AiM 23 pins connector + contacts

USB adapter

Part number: V02573030

Download the tech sheet

USB Cable

Part number: X90TMPC002

AiM USB cable - race beat

USB bulkhead adapter

Part number: V02573200

AiM USB bulkhead adapter

Related Items